Products









Single-channel weighing digital transmitter [rail]
DJB-W1X/M1X
- Convert the analog signal of the weighing sensor into a digital signal.
- DJB-W1X does not have a display.
- DJB-M1X has an LED display.
Product Features
Performance parameters
Mounting dimensions
Product Application
Related Downloads
- The analog signal output by the weighing sensor is converted into a digital signal.
- For RS485 leader/follower communication (one master and multiple slaves) remote weighing system.
- Rail mount, optional with digital display.
Technical Index
CPU System
- 32-bit ARM CPU, 72MHz main frequency, fast computing speed.
- EMC design, strong anti-interference ability, suitable for industrial environments.
Weighing Sensor Interface
- Excitation voltage/maximum current: DC5V/200mA.
- Signal input range: ±19.5mV.
- Weighing/force sensor output sensitivity: 1.0~3.5mV/V.
- High-precision 24-bit Σ-△ADC, resolution: 1/1,000,000.
- Sampling frequency: 200Hz.
- Unique anti-vibration filtering algorithm.
- Zero drift: ±0.2μV/℃ RTI (referred to input).
- Gain drift: ±5ppm/℃.
- Nonlinearity: 0.005%FS.
Digital Communication Interface
- Optional configuration: RS485.
- Communication protocol: Master-slave Modbus RTU.
- Baud rate can be set: 9600 [factory value], 19200, 115200bps.
- Parity check: None.
Operating Index
- Operating power supply: DC24V±20%, Max. 2W.
- Dimensions: 35.6×110×58mm (Width×Height×Depth).
- DIN rail mounting.
- DIN rail slot size: 35×1.6mm (Width×Depth).
- Operating temperature: -25℃~+45℃.
- Storage temperature: -30℃~+60℃.
- Relative humidity: No more than 85%RH.
- Weight: Approximately 80g.
- Protection level: IP50.
Recommend Products
Online Message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.